Seat Riser

You are logged in: Edit this product | Add images

Our Walk-in Tub Risers are 3 1/2 inches tall, 1 1/2 inches after compression, and come in custom width and depth dimensions. Custom fit is obtained by utilizing the radius corner template and completion of the order form. All our Risers contain safety features which include the stabilizing tabs and impact layers.They are fabricated using time tested materials that permit liquids to flow in and out for cleaning and sanitation. All materials inside or out will not absorb moisture and will not support mold or mildew.

Click here for the template used to determine the radius

Your Cost:  $180.00

Bidet Cutout
Color (required)
Dimension: Radius (Use radius template link above) (required)
Height: After compression (person sitting) (required)
Riser Dimension: Depth (Measure front to back) (required)
Riser Dimension: Width (Measure left to right) (required)
Walk in Tub Brand (required)

The Q&A on this Product
QUESTION:  What is a bidet cutout?
ANSWER:  The front of the cushion is cut out for a bidet. Bidets come on some tubs and are used for cleaning the backside. Most people do not order with a bidet cut out unless they have a bidet installed on the bathtub. Hope that helps.
QUESTION:  Do you sell/ship to Australia? Thanks Barbara
ANSWER:  Hi Barbara, we haven\'t ever shipped anywhere but US and Canada. But I am open to it with verified funds. I would have to research shipping/customs etc. Please call me when you have a moment and I can give you a quote. 1-888-779-2284 Ask for Zach. Thank you, Zach
QUESTION:  I am not sure what the radius template means. There is only a slight curve in our seat on the side as you enter the shower. What is the compression for the 8 in. riser?
ANSWER:  The radius template is used to make sure the back side of seat cushion matches the curvature of the back of your tub seat. The 8\" cushion compresses down to 6.5\" hope that helps.
QUESTION:  if cleaning becomes necessary, what is recommended procedure
ANSWER:  Great question! You use 2 tablespoons diluted bleach with gallon of water. Soak for 5-10 mins and rinse clean, let it dry turn up on edge. You need to be very conservative with the bleach.
QUESTION:  In walk-in tub seat riser, what does the bidet cutout dimension measure, length or width of the cutout? If length, what is the width? If width, what is the length? No picture of this on your website.
ANSWER:  Length. The width is cut and sewn to be three inches wide but when filled it sometimes is slightly less, maybe 2.3 or 2.75 wide.
QUESTION:  what is riser dim. front to backand left to right
ANSWER:  You determine the dimensions you need. Click on the red buy online button and it will walk you through the options like height, width and depth. You can also choose the color and radius of the back part of the cushion to match your bathtub. If you have any questions or need anything at all please call 1-888-779-2284. You can purchase online or call us directly to place an order. Hope that answers your questions. Thank you.
QUESTION:  Do I need to unzip and remove the insides for draining or clean only the outside?
ANSWER:  No you simply tilt up when not in use so all water drains out. You mainly need to keep outside wiped down but can unzip if inside needs cleaned.
QUESTION:  Is the 4" seat riser $180?
ANSWER:  Yes all risers up to 8" are $180.
Still have questions about this product?